Jiangsu Tianqi Star robot share: How do workers correctly operate the injection molding manipulator?

How to correctly operate the injection molding manipulator: The injection molding manipulator is a machine specially equipped for the active production of injection molding, which can reduce heavy physical labor, improve working conditions and safe production; An active production device that can imitate part of the function of the upper limb of the human body and can be actively controlled to transport products or cook things according to predetermined requirements for production operations. It plays an extremely important role in improving the production power of injection molding machines, stabilizing the production quality, reducing the rejection rate, reducing the production cost, and enhancing the competitiveness of enterprises.

How about the quality of the products made by the robot?

1. If the molding machine is active demoulding, the product will be scratched and stained with oil, resulting in defective products.

2, if people take out the product, there are four problems: first, there may be hands will scratch the product, second, there may be dirty hands and dirty products, third, such as multiple holes leak and crush the mold. Fourth, due to personnel fatigue and affect the production cycle, reduce the production power.

3, the use of manipulator conveyor belt, the production of packaging personnel can be single-mindedly strict quality control, will not be distracted by taking the product or too close to the injection molding machine, too hot and affect the operation, thereby reducing the production power.

4, the personnel take the product time is not fixed, will form the product shrinkage, deformation (if the material tube is too far, need to re-injection to form the material waste, the current material price is high), the manipulator take out time is fixed to ensure the quality of production.

5, the personnel to take the product need to close the safety door first, will form the forming machine life is shortened or damaged, affecting production. The use of manipulator can ensure the quality of injection molding and extend the life of the molding machine.

When using the injection molding manipulator, it is necessary to operate in accordance with the operating guidelines and operating requirements of the manipulator.

1, before the operation of loading and unloading must pay attention to check whether there is water, oil into the electrical control box, if the electrical damp, do not start, and to check whether the power supply voltage is compatible, front and rear safety door switch is normal.

2, verify that the motor rotation direction is common, and then open the power supply.

3, when the industrial robot needs to be removed, turn off the power of the injection machine, turn off the power of the robot, and turn off the pressure source of the robot.

4. Relieve air pressure. Loosen the cylinder retainer plate retainer screw and move the arm to move the buffer seat close to the arm.

5, tighten the cylinder fixing plate, so that the arm can not move. Lock the rotating safety screw so that the manipulator cannot rotate, etc.