Do you know how to change the mold of the injection molding machine?

Jiangsu Tianqi Star robot introduction: injection molding machine installation manipulator mold change steps are as follows:

1. Check the height of the manipulator grabber to ensure that it is consistent with the position of the mold to be replaced;

2. Attach the mold according to the grasping handle of the manipulator;

3. After ensuring that the mold is installed correctly, clamp it with the manipulator;

4. Press the button on the manipulator grab to make it grab the mold;

5. When installing the mold, clamp the nut to ensure that the mold is firmly installed;

6. Put down the manipulator to grab the mold and place it in the working position;

7. Click the parameters in the program to adjust, so that the machine can work normally;

8. Check other parameters to ensure that the mold is set correctly and the mold machine runs normally.