Jiangsu Tianqi Star robot simple share: Precautions for the installation of robot and injection molding machine

Now it is automated, but we should pay attention to this in the process of installing injection molding machines and manipulators.

The manipulator is fast, but at the same time we should pay attention to safety, and so on.

One: During the installation process, it is necessary to pay attention to the unity of direction between the two injection molding machines in close proximity, or leave enough spacing to ensure that the manipulator and the manipulator block each other in the production process.

Two: In the process of use, you need to pay attention to safety, and it is forbidden to stand under the robot to avoid being hurt by the robot.

Three: The signal connected with the injection molding machine must have an anti-collision program to prevent the manipulator from clamping inside during the mold locking process, causing unnecessary economic losses.

Four: When the manipulator is working, all the actions can not hinder the machinery of the injection molding machine, as well as the surrounding facilities.

Five: Need to operate the manipulator under the guidance of the staff.

Six: Regular maintenance of the manipulator, according to the manual operation