What are the precautions for the use of injection molding manipulator?

Jiangsu Tianqi Star Robot - Focus on injection molding robot manipulator R & D, design, production set sales and service in one of the intelligent enterprise

1, pay attention to the clamping force of the injection molding manipulator: When using the loading and unloading manipulator, it is necessary to choose the appropriate clamping force according to the different types of materials, and do not set the clamping force too large, otherwise it may damage some processed materials, especially the surface of the rod material.

2, pay attention to the opening and closing range of the injection molding manipulator: usually the opening and closing range of the loading and unloading manipulator is moderate, but if the space environment allows, the opening and closing range of the manipulator can be increased as much as possible. Especially when grasping large volumes of materials, try to adjust the opening and closing range in advance to make its accuracy higher.

3, pay attention to the speed of the injection molding manipulator: when using the loading and unloading manipulator, the stability of its operation should be taken as the basic condition. If the volume of the grasped object is large or the running speed is too fast, the overall stability of the equipment is reduced, which may cause the arm of the manipulator to vibrate and reduce the grasping accuracy of the manipulator.

4, pay attention to the sliding situation of the injection molding manipulator: the working environment of the loading and unloading manipulator is more complex, and some small materials are easy to enter the machine tool, which will affect the operation of the machine tool. Therefore, if the loading and unloading manipulator does not slide smoothly or there is an obviously abnormal sound, it is necessary to stop the machine immediately for inspection to prevent further damage.