Jiangsu Tianqi Star robot introduction: Where is the difference between the bullhead manipulator and the ordinary manipulator?

Injection molding manipulator is now a lot of products factories have products, it can replace the human to complete simple, repetitive work, than artificial endurance, cost-effective is higher, but the manipulator is also divided into different types, one of which is called the bullhead manipulator, then what is the difference between the bullhead manipulator and the ordinary manipulator?

The full name of the bullhead manipulator is the bullhead three-axis single-arm single-cut servo manipulator, which is a similar structure of the bullhead planer. The main application scenario of the manipulator is in the injection molding industry. Because the structure of the bullhead manipulator is very simple, it is suitable for taking out and burying large injection molding products, so it can replace the manual removal and burying such simple and repetitive work.

In fact, the difference between the bullhead manipulator and the bullhead manipulator is not very big, usually speaking, the bullhead machine is a three-axis machine, but it also has five axes, and the ordinary manipulator is generally three-axis.

Advantages of manipulator

1, the robot program can be freely programmed.

2, the operating system is relatively simple, if you are a novice, training does not take too long to get on the job.

3, there are multiple groups of input and output points, can be used with peripheral equipment.