Injection molding machine manipulator control system is how to achieve control?

The elements of the injection molding machine suspicious request interception notification control include operation order, arrival orientation, action time, movement speed, acceleration and deceleration speed. Injection molding machine manipulator control system can be selected according to the needs of the action, planning and digital sequence control. It must first prepare a program to be stored, and then operate the manipulator according to the specified program.

There are two kinds of program storage methods: separate storage and collective storage. Separate storage is to store the information of various control elements in more than two kinds of storage devices, such as sequence information stored in the latch plate, CAM drum, punch belt; Azimuth information is stored in time relay, constant speed reversal drum, etc. Centralized storage is the storage of all the information of various control elements in a storage device, such as tape, magnetic drum, etc. This method is used in situations where order, orientation, time, speed, etc. must be controlled at the same time, that is, in the case of continuous control.