What are the precautions for the daily use of three-axis and five-axis servo manipulators? 

 Injection molding industry in the use of three-axis, five-axis servo manipulator, they can not only take products outside the mold, embedded products in the mold (labeling, embedded metal, secondary molding, etc.), but also take out after the automatic packaging, automatic storage, the whole plant production control system, the manipulator takes out the mold products, replacing the original semi-automatic production to fully automated production, Molding raw material automatic feeding system, waste recycling system, etc. 

So what are the precautions for the daily use of three-axis and five-axis servo manipulators? 

Below, to summarize some of the main points for attention.

 1, when the external power supply abnormal situation, the control system will send a message to remind the operator of this situation, in order to make the whole system can work safely, it is necessary to set a safety circuit in the external, add a protection route, to ensure the safety of machine operation.

 2, in the device, wiring, operation, protection of the five-axis servo manipulator, first familiar with the contents of the machine manual, use is also necessary to know the mechanical, electronic knowledge safety precautions, when the power is running, mechanical and electronic fields are connected, the working principle is more complex, in clear how to work in order to master the correct way to use the five-axis servo manipulator, And timely and correct handling of any emergency situation. 

3, three-axis, five-axis servo manipulator should be installed on metal and other flame retardant, because the manipulator is a powered equipment, if the contact with combustible will produce a violent chemical reaction, so pay special attention to the installation environment is far from combustible, eliminate potential danger.

 4, the use of three-axis, five-axis servo manipulator is necessary to ground, the manipulator is a large machine equipment, electricity consumption is also far above ordinary electrical appliances, for the user's personal safety considerations, grounding use can avoid accidental injury to the staff to the greatest extent. 

5, three-axis, five-axis servo manipulator wiring work is necessary to be carried out by professional electricians, wiring is more complex, the need for professional electronic knowledge staff to deal with, safe wiring is more guaranteed, the operation of the staff please stand in the safe position, the mechanical arm is strictly prohibited. 

Familiar with the use of three-axis, five-axis servo manipulator notes, is not only responsible for the operator's life safety, but also for the correct operation of the machine serious attitude of approval, in the continuous development of the mechanical industry, the demand for the manipulator will be more vigorous, so understand how to correctly use the three-axis, five-axis servo manipulator is imperative.